Testing Boats out on Bear River in Nova Scotia Canada
The inflatable boat PVC Shore-480 is suitable for family holidays, fishing, hunting and exploring.
These airboats can be used on many surfaces from ice, snow, shallow cobblestone rivers, gravel rivers to lakes and oceans and everything in between.
The boat is made from reinforced frost-resistant boat PVC 850 g/m2, which has increased strength and durability.
The reinforced PVC does not lose elasticity and does not stretch, thus increasing the life of the boat.
The multi-ball bottom of the PVC boat consists of 8 airtight compartments.
The equipment of the boat includes: 7 handles for carrying, rope and mounts for cargo, 4 air valves, 2 valves for emergency air discharge, oarlocks and holders for oars.
The PVC Shore-480 boat is equipped with an aerial installation and armor from PND 3 mm , which will turns it into a full-fledged airboat. This is like an armadillo skin protection.
Length: 4.8 metres;
Width: 1.86 m;
The cockpit is 3.7 metres long;
The cockpit is 0.86 metres wide;
The diameter of the cylinder is 0.5 m;
The number of compartments is 8 pieces;
Passenger capacity - 5 people;
Cargo capacity max. - 900 kg;
Cargo capacity on gloss max. - 450 kg;
The trunk is 35 mm thick;
Pressure in cylinders - 0.25 bar;
Pressure in NDD - 0.3 bar
The weight with armor is 120 kg.
Boat - 1 piece;
Folding paddle - 2 pieces, length - 1.8 m;
Seat (1,2 x 20,25 x 18 m q bag) - 2 pieces;
A foot pump with an adapter to the boat ( Bravo Turbo Max 12v Pump)
A Bag that contains the following:
SIP kit ( Glue, PVC Fabric, Air valve, Air Valve Key)
Instructions and warranty card - 1 piece.
A quality certificate.
The "Bereg-35" propellant is equipped with a zongshen GB1000FE (999CC) engine, which is equipped with an electric starter, decompression system and transistor ignition, which ensures a quick start-up.
Minimum length from 4.2 metres;
The presence of a trunk for fixing;
-V-shaped arrangement of 2 cylinders at a 90-degree angle, gas distribution system with upper location of OHV valves;
The presence of a cast-iron cylinder casing, chrome piston rings, reinforced support bearings of a cranked shaft with a diameter of 36.5 mm;
- wear-resistant alloy plates of GRM valves;
High-performance wing for better cooling;
- Double filtering elements provide effective performance in dusty conditions and are easily serviced thanks to the side structure of the air intake.
Specs of the universal "Bereg-35"
Engine - 4 stroke;
Fuel - AI 92;
Max. Full-load consumption - 8 l/h;
The frame is a steel profile of 15-25 mm;
Screw 2-bladed, 1756 mm;
Belt reducer, jagged;
The tank volume is 24 litres;
Package size - 1.5 x 0.7 x 0.5 m, 1.5 x 1.2 x 0.3 m, 1 x 0.4 x 0.2 m;
Weight (dry) - 85/120 kg.
A new item from Bereg we are now offering for pre-order
Catamaran inflatable K6 with aluminum frame
K6 catamaran - inflatable catamaran of durable PVC for water tourism, recreation, hunting and fishing.
The catamaran is made from reliable boat PVC fabric, which can withstand heavy loads. A cylinder divided into two chambers, each of which has its own valve to inflate.
The frame consists of 12 tubular parts with a length of 2 m, which are attached to each other connecting elements.
Load capacity max, kg 1500-1700
Passenger capacity 6 - 9 persons
Length of frame, m 4
The width of the frame,m 2
Length of cylinder, m 5,5
The height of the cylinder, m 0,72
The number of chambers in the cylinder, 2 PCs.
Set weight, kg 58,7
Frame material (frame) Aluminium Д16Т1, 40 mm
The connections material frame Aluminium В95Т1, 8 mm
The material of the cylinder, top/bottom,g/m2 PVC 620/1200
Deck material gr/m2 PVC 650
The kit includes:
1. Cylinder - 2 PCs.;
2. Pipe frame (frame) - 12 PCs.;
3. The connecting elements of the frame - 2 PCs.;
4. Mounting frame - 16 PCs.;
5. Deck - 1 piece.
6. Nylon-cord (6mm) - 40 m;
7. Bag - 2 PCs.;
These are available for pre-order contact us for more detail.
Just so you can see how cool these boats are!
Shipment in, be sure to place your orders now for hunting, fishing and winter camping season.